Doctoral Thesis

25 completed theses

2018-2026

17 theses in progress

2026

11 theses with international mention

2018-2026

Supervised theses by LUMES members (2018-2026)

Advanced techniques on microscopy and biophotonics with ultrashort pulses

AUTORA / AUTHOR: Nuria Sevilla Sierra — Grupo ALF, Universidad de Salamanca

Fecha de inicio / Start date: Septiembre 2022

DIRECCIÓN / SUPERVISION:

Directora: Carolina Romero Vázquez — Grupo ALF, Universidad de Salamanca

Director: Ignacio López Quintás — Grupo ALF, Universidad de Salamanca

Fabricación de dispositivos fotónicos avanzados con láser de femtosegundos: aplicaciones optofluídicas y sensado

AUTOR / AUTHOR: Víctor Arroyo Heras — Grupo ALF, Universidad de Salamanca

Fecha de inicio / Start date: Septiembre 2022

DIRECCIÓN / SUPERVISION:

Directora: Carolina Romero Vázquez — Grupo ALF, Universidad de Salamanca

Director: Ignacio López Quintás — Grupo ALF, Universidad de Salamanca

Temporal characterization of scalar and vector ultrashort laser pulses

AUTOR / AUTHOR: Cristian Barbero Pérez — Grupo ALF, Universidad de Salamanca

Fecha de inicio / Start date: Octubre 2022

DIRECCIÓN / SUPERVISION:

Director: Íñigo Sola Larrañaga — Grupo ALF, Universidad de Salamanca

Director: Benjamín Alonso Fernández — Grupo ALF, Universidad de Salamanca

Spatio-temporal study of high-power laser pulses

AUTORA / AUTHOR: Irene Hernández Palmero — Grupo ALF, Universidad de Salamanca / CLPU

Fecha de inicio / Start date: Julio 2023

DIRECCIÓN / SUPERVISION:

Director: Julio Román Álvarez de Lara — Grupo ALF, Universidad de Salamanca

Director: Enrique Conejero Jarque — Grupo ALF, Universidad de Salamanca

Spatio-temporal evolution of femtosecond laser pulses in a petawatt class laser system

AUTOR / AUTHOR: Enrique García García — Grupo ALF, Universidad de Salamanca / CLPU

Fecha de inicio / Start date: Septiembre 2023

DIRECCIÓN / SUPERVISION:

Director: Íñigo Sola Larrañaga — Grupo ALF, Universidad de Salamanca

Director: Benjamín Alonso Fernández — Grupo ALF, Universidad de Salamanca

Óptica no lineal extrema con haces láser estructurados en blancos sólidos macroscópicos

AUTOR / AUTHOR: Sergio Martín Domene — Grupo ALF, Universidad de Salamanca

Fecha de inicio / Start date: Septiembre 2023

DIRECCIÓN / SUPERVISION:

Director: Carlos Hernández García — Grupo ALF, Universidad de Salamanca

Director: Luis Plaja Rustein — Grupo ALF, Universidad de Salamanca

Photoresponse of van der Waals heterostructures

AUTOR / AUTHOR: Óscar Castelló Nieto — Grupo QMADE, Universidad de Salamanca

Fecha de inicio / Start date: Noviembre 2023

DIRECCIÓN / SUPERVISION:

Director: José Caridad Hernández — Grupo QMADE, Universidad de Salamanca

Director: Juan Delgado Notario — Grupo QMADE, Universidad de Salamanca

Optoelectronic properties of twisted van der Waals heterostructures

AUTORA / AUTHOR: Namrata Saha — Grupo QMADE, Universidad de Salamanca

Fecha de inicio / Start date: Enero 2024

DIRECCIÓN / SUPERVISION:

Director: José Caridad Hernández — Grupo QMADE, Universidad de Salamanca

Director: David López Díaz — Grupo QMADE, Universidad de Salamanca

Nonlinear properties of van der Waals heterostructures

AUTOR / AUTHOR: Sahil Parvez — Grupo QMADE, Universidad de Salamanca

Fecha de inicio / Start date: Febrero 2024

DIRECCIÓN / SUPERVISION:

Director: José Caridad Hernández — Grupo QMADE, Universidad de Salamanca

Director: Yahya M. Meziani — Grupo NanoTECH, Universidad de Salamanca

Diseño de herramientas para la generación y caracterización de pulsos láser estructurados en el régimen de attosegundo

AUTOR / AUTHOR: Mario García Hernández — Grupo ALF, Universidad de Salamanca

Fecha de inicio / Start date: Septiembre 2024

DIRECCIÓN / SUPERVISION:

Director: Carlos Hernández García — Grupo ALF, Universidad de Salamanca

Director: Luis Plaja Rustein — Grupo ALF, Universidad de Salamanca

Esquemas de medida ultrarrápida para diferentes longitudes de onda e independientes de ajustes de fase

AUTOR / AUTHOR: Mario Guerras Rodríguez — Grupo ALF, Universidad de Salamanca

Fecha de inicio / Start date: Septiembre 2024

DIRECCIÓN / SUPERVISION:

Directora: Aurora Crego García — Grupo ALF, Universidad de Salamanca

Director: Íñigo Sola Larrañana — Grupo ALF, Universidad de Salamanca

Advanced photonic devices integrated in crystalline materials by femtosecond laser irradiation: fabrication and nonlinear properties

AUTORA / AUTHOR: Marta Gómez Gómez — Grupo ALF, Universidad de Salamanca / IBFG

Fecha de inicio / Start date: Octubre 2024

DIRECCIÓN / SUPERVISION:

Directora: Aurora Crego García — Grupo ALF, Universidad de Salamanca

Director: Javier Rodríguez Vázquez de Aldana — Grupo ALF, Universidad de Salamanca

Fabricación y caracterización de materiales compuestos avanzados

AUTOR / AUTHOR: Carlos Izquierdo Martín — Grupo LAMCOM, Universidad de Salamanca

Fecha de inicio / Start date: Octubre 2024

DIRECCIÓN / SUPERVISION:

Director: Roberto Guzmán de Villoria — Grupo LAMCOM, Universidad de Salamanca

Directora: Leticia Aguado Ferreira — Grupo LAMCOM, Universidad de Salamanca

Efectos quirales no lineales en materiales electrónicos cuánticos

AUTOR / AUTHOR: David Hervalejo Sancho — Grupo QMADE, Universidad de Salamanca

Fecha de inicio / Start date: Octubre 2025

DIRECCIÓN / SUPERVISION:

Director: José Caridad Hernández — Grupo QMADE, Universidad de Salamanca

Director: Carlos Hernández García — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

New Scenarios for the Generation of Ultrashort Laser Pulses in Different Spectral Regions through Nonlinear Propagation

AUTORA / AUTHOR: Marina Fernández Galán — Universidad de Salamanca

Ultrashort laser pulses, with durations down to a few optical cycles of their carrier wave, have revolutionized our way of studying the microcosmos through the interaction of coherent light with matter. The development of ultrafast laser sources with increasingly better characteristics is essential for the progress of modern ultrafast science, which promises to reveal the most fundamental processes of nature occurring in extremely short temporal and spatial scales. Among the main properties of a laser source, the wavelength is one of the most important degrees of freedom in any application, since it sets the spatial resolution and determines the shortest achievable pulse duration through the oscillation period, providing access to different temporal scales. Moreover, the laser wavelength governs the nature of light-matter interaction since many processes are triggered by the absorption of light at different photon energies. Therefore, the generation of ultrashort laser pulses across the optical spectrum is key to studying ultrafast dynamics in matter at various spatial, temporal and energy scales, and has become a topic of continuous research. In this thesis we study a wide variety of novel strategies for the generation of ultrashort laser pulses in different spectral regions from the infrared to the extreme ultraviolet, and with durations ranging from the few-femtosecond to the attosecond timescale. Supported by detailed numerical simulations and some experimental results from our collaborators, we provide new theoretical insight into the complex nonlinear light-matter interactions involved in each configuration and develop comprehensive design guidelines for their optimization. Starting from the infrared, we first analyze the use of the nonlinear reverse propagation method to optimize post-compression setups based on gas-filled hollow capillary fibers for the generation of few-cycle pulses with improved temporal contrast. Pushing the limits of the hollow fiber technology, we then demonstrate the scalable generation of sub-cycle infrared transients by extreme soliton self-compression in capillaries with a decreasing pressure gradient and discuss the advantages of this configuration compared to the more common static pressure situation. Afterwards, we delve into soliton dynamics in hollow fibers with precise dispersion engineering via pressure control points and propose a novel strategy for the generation of broadly tunable ultraviolet pulses with record sub-1.5 fs durations by exploiting resonant dispersive wave emission and cross interaction with solitons. Moving forward towards the extreme ultraviolet, we then investigate a new and robust scheme capable of producing high-contrast isolated attosecond pulses which combines soliton self-compression in gas-filled capillaries and high-order harmonic generation. Finally, we prove the feasibility of long-medium geometries as targets for driving harmonic generation at high pulse energies and unveil the nonlinear propagation mechanisms that lead to the generation of extreme-ultraviolet isolated attosecond pulses with improved temporal contrast and conversion efficiency in semi-infinite gas cells. Overall, the results of this thesis offer new strategies to overcome current limitations in ultrafast science and aim to make next-generation experiments in time-resolved spectroscopy accessible to a wide range of users.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Julio San Román Álvarez de Lara — Grupo ALF, Universidad de Salamanca

Director: Enrique Conejero Jarque — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

Artificial Intelligence Applied to High Harmonic Generation Driven by Structured Laser Pulses

AUTOR / AUTHOR: José Miguel Pablos Marín — Universidad de Salamanca

In this thesis we present fundamental research at the intersection of High Harmonic Generation (HHG) and Artificial Intelligence (AI), demonstrating the potential of combining both fields to model and understand ultrafast physical phenomena. Throughout this work, the major result was to accurately and efficiently describe both the microscopic quantum dynamics and the macroscopic propagation effects of HHG within the development of an AI-based model trained with exact results from the Three-Dimensional Time-Dependent Schrödinger Equation (3D-TDSE). This approach drastically reduces computational costs (from months to hours or even minutes) while retaining the quantum-level precision, that enables us further exploration of the HHG process. This hybrid AI-3D-TDSE model is capable of predicting the atomic dipole acceleration as a function of the amplitude and phase of the driving laser field. Beyond its simplicity, once trained, the neural network effectively replaces the 3D-TDSE at every point of the generating medium. Afterwards, the HHG emissions can be propagated to the far field through the integral solution of Maxwell’s equations. The model has been successfully validated in theoretical and experimental contexts. It was first employed to simulate and analyze HHG driven by structured laser beams of vortices with different Orbital Angular Momentum (OAM), accurately reproducing the spatial intensity distributions, OAM spectra, and temporal emission profiles of synthesized attosecond pulses. Moreover, it has been used as theoretical backup of experiments generating HHG with Hermite-Gauss (HG) driving beams, where the harmonic propagation give rise to an interference pattern between the different lobes of the HHG beams formed in the near field. Subsequently, the model was extended to mixed gaseous media, revealing a regime of coherent interference between species that acts as a natural spectral filter. These results highlight the potential of the developed framework for control the HHG emission, along with the attosecond pulse characteristics. The results presented here show that integrating AI into strong-field physics not only accelerates computation but defines other paths to follow in the standard simulation methodologies. Although this model is not general, it is perfectly suited to compute macroscopic HHG driven by structured laser pulses. Looking ahead, future efforts may include extending the model to incorporate non-linear propagation of the driving beam in dense media, accounting for dispersion from both neutral atoms and free electrons, both affected by the gas pressure. In such a case, a comprehensive analysis over the required dataset must be performed, as the number of free parameters increases abruptly. Another direct extensions of the model could be the addition of the wavelength and polarization of the driving beam, giving rise to a further generalization of the methodology here developed. From another perspective, the development of AI tools in HHG and attosecond science can be use to develope diagnostic techniques to characterize the properties of the Extreme Ultraviolet (EUV) emission in experiments. Attosecond light science faces several challenges in the development of characterization techniques that can retrieve spatiotemporally the properties (polarization, intensity, and phase) of attosecond pulses. AI may open the route for in situ measurements that can rely on accurate predictions. Palabras clave: High harmonic generation Attosecond science Artificial intelligence Time dependent Schrödinger equation Structured light Ultrafast science Nonlinear optics Strong-field physics
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Carlos Hernández García — Grupo ALF, Universidad de Salamanca

Codirector: Francisco Serrano Rodríguez — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

Shaping Light in Space and Time: Ultrafast Structured Sources for Attosecond and Magnetic Field Enginering

AUTOR / AUTHOR: Rodrigo Martín Hernández — Universidad de Salamanca

This thesis presents a theoretical study of strong-field light-matter interactions driven by structured light, in two different scenarios. The first part focuses on the generation and amplification of strong, locally isolated, magnetic fields through the interaction of structured light beams with matter, and the exploration of one of their potential applications. Structured light beams offer the possibility to decouple spatially the electric and magnetic field components carried by a laser beam. We investigate the amplification of the paraxial longitudinal magnetic field component of azimuthally polarized vector beams. This magnetic field is maximum in an electric field singularity and, therefore, it is locally isolated from the surrounding electric field distribution. Our study suggests that the longitudinal magnetic field carried by an azimuthally polarized laser beam can be enhanced through the interaction with tailored metallic nanoantennas. The potential applications of these strong and ultrafast isolated magnetic fields could range from the control of the magnetization dynamics in magnetic materials to atomic and molecular spectroscopy or particle manipulation. As a potential application, we explore the use of intense isolated magnetic fields to assist the high-order harmonic generation (HHG) process. Our results demonstrate that HHG assisted by magnetic fields lead to the emission of ultra-broadband, attochirp-free HHG spectra, and consequently, to near Fourier-limited attosecond pulses. The second part of this thesis is devoted to the study of HHG driven by various types of structured light fields, and the influence of these driving fields on the spatial and temporal properties of the resulting high-photon-energy radiation. We follow a double-folded strategy: the generation of novel complex structured light fields at the attosecond scale and the enhancement of the intensity and focusing properties of attosecond HHG sources. We introduce the use of hollow Gaussian driving beams in HHG to increase the intensity of attosecond pulses. Hollow Gaussian beams allow to deliver a larger amount of energy at the target compared to standard Gaussian beam schemes, while keeping the intensity below the barrier suppression regime. Our theoretical simulations demonstrate that this configuration allows for more compact HHG setups with shorter driving laser beamlines and, combined with the enhanced refocusing properties of the harmonics, lead to the generation of attosecond pulses with up to three times more peak intensity. This intensity gain could potentially allow HHG sources to become better suited for applications where high photon fluxes are required, such as nanoimaging, metrology or spectroscopy. Preliminary experimental results performed at the group of Profs. Anne L’Huiller and Cord L. Arnold, at Lund University (Sweden), corroborate the properties of the high-order harmonics driven by hollow Gaussian beams. Subsequently, we investigate the up-conversion of near-infrared spatiotemporal optical vortices (STOVs) to the extreme-ultraviolet through HHG, with high topological charges. A comprehensive theoretical framework is developed to describe the generation and propagation dynamics of extreme-ultraviolet STOVs through HHG. Our theoretical simulations are in excellent agreement with the first experimental observations of HHG driven by STOVs, performed by the group of Profs. Margaret M. Murnane and Henry C. Kapteyn at the University of Colorado at Boulder (United States). Finally, we propose a novel scheme for the generation of extreme-ultraviolet STOVs via HHG, in which all harmonic orders are emitted in the far field with the same topological charge. This approach paves the way for the synthesis of STOVs at attosecond timescales. These attosecond pulses with non-trivial topologies, coupled in the temporal and spatial domains, could be of high interest for spatiotemporal probing ultrafast electronic dynamics in novel materials or in helical circular dichroism experiments
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Carlos Hernández García — Grupo ALF, Universidad de Salamanca

Director: Luis Plaja Rustein — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

Ultrashort Pulse Laser-Induced Photodynamics and Microprocessing of Elastomers for Biomedical Engineering

AUTOR / AUTHOR: Chahinez Berrah — Universidad de Salamanca

This thesis focuses primarily on the efficient generation, detection, characterization, and application of ultrashort laser pulses in the processing of various materials for biological and medical applications. For this purpose, a Ti:Sapphire laser oscillator amplified using a pulse amplification system was used, achieving short pulse durations in the femtosecond range with a repetition rate of 5 kHz and energy up to 1.6 mJ per pulse. These pulses are spectrally tuned using a parametric amplifier. The pulse wavelength is modulated through nonlinear processes, allowing it to be tuned within a range of 240 to 2400 nm. This mechanism enables the Ti:Sapphire laser to serve as a source of ultrashort optical pulses. Instruments such as FROG or SPIDER are typically used to characterize ultrashort pulses. These pulses are characterized by their extremely short duration, which allows for the monitoring of ultrafast physical, chemical, and biological processes. They also have a wide spectral bandwidth, high intensity, and high peak energy due to the energy being concentrated within a narrow time period. Many experimental parameters such as laser beam size and power, focusing geometry, treatment time, optical fibers used, and others have been characterized and optimized to achieve the desired goals. Recently, optical techniques have been widely applied in medical diagnosis, prognosis, and treatment. Several optical imaging and spectroscopy techniques have achieved significant success in medical and biological research. Time-resolved fluorescence is one of these techniques, and it is a powerful tool for studying tissues and cells. The first chapter of this thesis describes time-resolved fluorescence of two different samples, BODIPY and DEXTRAN-TR, after excitation with an ultrafast laser beam. We optimized the experimental setup for fluorescence measurements of both BODIPY and DEXTRAN-TR fluorophores and designed a MATLAB program that allows reconstruction of the real fluorescence function. This approach aims to make this technique compatible with various biomedical applications. This work aims to research, develop, and validate the application of time-resolved fluorescence within blood vessels, medical tissue diagnosis, and cancer surgery. The experimental setup was optimized to maximize fluorescence and determine the spectral resolution. The optical fiber was one of the most important components responsible for this. The fiber core acts as an input slit, and therefore its size affects the accuracy of the device. The narrower and smaller the opening of the core, the smaller the amount of fluorescence captured and the greater the spectral resolution. Conversely, the larger the fiber core, the greater the amount of light captured, which is the desired result, obtaining a higher-intensity fluorescence signal and achieving a better signal-to-detector ratio. For this purpose, fibers with a slit size of 10 micrometers and a resolution ranging from 0.4 to 0.8 nanometers were used. Data analysis, filtering, and processing methods were also presented to eliminate significant noise and display the fluorescence lifetimes of the two samples. The most important applications of this technology were demonstrated in BODIPY-based photodynamic therapy, BODIPY probes for lipid membranes, and fluorescent pH sensors based on BODIPY for lipid membranes. The importance of DEXTRAN-TR dye in cell adhesion, tissue differentiation and maintenance, and cell recognition and sorting were also highlighted, in addition to measuring vascular permeability and assessing ionic balance. This technique reveals the unique properties of the studied fluorophores by measuring the fluorescence intensity as a function of light wavelength, thus measuring the time-resolved transient fluorescence at specific wavelengths and then characterizing these fluorophores and extracting their most important properties. The second chapter of this thesis presents a flexible, precise and reproducible method for fabricating porous polydimethylsiloxane (PDMS) membranes using ultrashort pulse laser ablation, proposed as an alternative to conventional techniques. PDMS membranes with thicknesses of 25, 50 and 100 microm were systematically microdrilled to investigate the influence of key laser parameters - pulse energy and shutter time - on the dimensions, geometry and quality of the resulting holes. Results indicate that pulse energy is the dominant factor affecting pore dimensions, while shutter time above 1000 ms and thicknessplay a secondary role. Higher total energy increases the taper angle of the pores and the extent of the heat-affected zone is directly related to both the laser beam diameter and membrane thickness. A numerical model was developed to simulate the ablation process, incorporating plasma shielding and showing that material removal is strongly pulse energy-dependent. Based on experimental data, an empirical model was also developed to estimate the optimal pulse energy required to fabricate membranes with 10 microm hole diameters and 40 microm spacing. The model predictions showed good agreement with experimental measurements for the exit hole diameters, while larger deviations were observed for entry diameters. Finally, to validate the biological viability of the manufactured membranes, human adipose tissue-derived mesenchymal stem cells were cultured on the laser-processed PDMS films integrated into Organ-on-Chip (OoC) devices. The cells exhibited strong cell adhesion and high metabolic activity, confirming the suitability of this laser-based fabrication method for the development of PDMS membranes in OoC systems.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Andrés Sanz García — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

Multipass Cell Post-Compression Schemes for High-Quality Ultrashort Laser Pulses

AUTOR / AUTHOR: Víctor Wilfried Segundo Staels — Universidad de Salamanca

This doctoral dissertation investigates the nonlinear post-compression of ultrashort laser pulses in multipass cells (MPCs), addressing a key challenge in ultrafast laser science: the generation of clean, few-cycle pulses from high-power Yb-based laser systems. As these lasers increasingly replace Ti:Sapphire systems in high-repetition-rate applications, efficient post-compression techniques become essential. A comprehensive numerical and theoretical framework was developed to simulate nonlinear propagation in MPCs, fully resolving the spatio-temporal and spatio-spectral dynamics (3+1)D, including diffraction, dispersion, and nonlinear effects. The framework enables systematic exploration and optimization of MPC performance under realistic experimental conditions. Through this approach, the thesis identifies the Enhanced Frequency Chirp Regime (EFCR) as an optimal operating regime for achieving broad spectra with high pulse cleanness in MPCs. The study extends to both gas-filled and bulk-filled MPCs, analyzing the influence of input chirp, mirror dispersion, and pulse distortions, confirming the intrinsic robustness of the MPC process. A grism-based compressor is designed and optimized using a particle-swarm algorithm to compensate complex spectral phases, yielding near-transform-limited pulses with excellent temporal cleanness. Altogether, the work provides a high-fidelity modeling tool and design strategy for next-generation ultrafast laser systems. Its insights and methods contribute directly to advancing stable, high-quality few-cycle pulse generation in Yb-based platforms and reducing experimental trial-and-error in post-compression design.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Enrique Conejero Jarque — Grupo ALF, Universidad de Salamanca

Codirector: Julio San Román Álvarez de Lara — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

Modeling the Interaction Between Spin Waves and Domain Walls in Synthetic Antiferromagnets

AUTOR / AUTHOR: Hadjoudja Amina — Universidad de Salamanca

La modulación, manipulación y propagación eficientes de las excitaciones de las ondas de espín en la nanoescala en materiales ordenados son requisitos fundamentales para la utilización potencial de las ondas de espín como portadores de información en aplicaciones magnónicas. El control de las ondas de espín se puede lograr a través de varios métodos, incluidos los campos eléctricos, la deformación o los campos magnéticos, lo que abre la posibilidad de realizar dispositivos espintrónicos totalmente magnónicos. Sin embargo, el gran tamaño de los terminales de control y el alto consumo de energía de estos dispositivos plantean desafíos para las aplicaciones prácticas. En respuesta a la necesidad moderna de minimizar el consumo de energía para la computación y el almacenamiento de datos, se están buscando activamente estrategias alternativas para controlar la dinámica de las ondas de espín. El uso de texturas magnéticas como las paredes de dominio, el vórtice y el esquirmión se está considerando como alternativas potenciales en magnónica debido a su capacidad para generar y manipular magnones en la nanoescala. Entre estos, las paredes de dominio han atraído recientemente una atención considerable. Investigaciones anteriores han demostrado que las paredes de dominio se pueden utilizar para manipular la fase y la magnitud de las ondas coherentes de espín de una manera no volátil, lo que subraya su potencial en el control de las ondas de espín. Además, se ha demostrado que las ondas de espín, a su vez, pueden alterar las posiciones de las paredes de dominio magnético a través del efecto de par de transferencia de espín generado por la corriente magnónica de espín. A pesar de estos avances, la interacción mutua entre las paredes de dominio y las ondas de espín sigue siendo un tema de investigación fundamental. Esta tesis tiene como objetivo explorar nuevos fenómenos basados en paredes de dominio para el control de la propagación de ondas de espín y la generación de radiación de ondas de espín en orden antiferromagnético utilizando materiales antiferromagnéticos sintéticos a través de simulaciones y resultados analíticos. En primer lugar, mediante simulaciones micromagnéticas, investigamos un método para controlar la propagación de las ondas de espín en antiferromagnetos sintéticos. Demostramos que un campo magnético externo puede manipular la interacción entre las paredes de dominio y las ondas de espín que se propagan polarizadas linealmente en antiferromagnéticos sintéticos. Nos encontramos con dos regímenes con una fuerte transición entre ellos. En campos grandes, las ondas de espín son fuertemente reflejadas por la pared de dominio y, en consecuencia, esta última es impulsada hacia adelante. En campos bajos, sin embargo, no hay reflexión y, sin embargo, la pared de dominio sufre un pequeño desplazamiento hacia adelante, que se atribuye al cambio en el momento lineal de los magnones a medida que pasan a través de la pared de dominio y al desequilibrio en la población de los dos modos de oscilación presentes en la excitación polarizada linealmente. En particular, demostramos que la transición entre los dos regímenes ocurre en el valor de campo para el cual la frecuencia de excitación coincide con la del modo de oscilación dextrógiro. En la segunda parte, nos centramos en la respuesta de una pared de dominio magnético a un campo magnético externo en un antiferromagnético sintético magnetizado perpendicularmente utilizando simulaciones micromagnéticas y un modelo reducido. Descubrimos que el campo externo induce un desplazamiento considerable entre la posición de la pared de dominio en cada capa, que puede ser mayor que el ancho de la pared de dominio para un campo suficientemente fuerte. También estudiamos la evolución dinámica del sistema cuando se aplica o se elimina este campo. En ambos casos nos encontramos con una respuesta compleja con dos fases distintas que involucran tanto la rotación de la pared de dominio interna como las oscilaciones acopladas de la pared de dominio entre capas. Como resultado de esta dinámica, se irradian ondas de espín. La radiación emitida se caracteriza por un espectro de banda ancha y puede detectarse lejos de la pared de dominio
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Luis López Díaz — Grupo SINAMAG, Universidad de Salamanca

Codirector: Felipe García Sánchez — Grupo SINAMAG, Universidad de Salamanca

Portada de la tesis doctoral

Effects of Crystal Symmetries in High Harmonic Generation from Graphene

AUTORA / AUTHOR: Ana García Cabrera — Universidad de Salamanca

High harmonic generation (HHG) stands nowadays as a well-established tool to produce high-frequency coherent radiation in the form of attosecond pulses. On the one hand, given the short period and wavelength of the radiated fields, it can be employed to probe matter at the microscopic scale. On the other hand, the emitted pulses themselves contain signatures of the electronic dynamics in the target, allowing for the so-called high-harmonic spectroscopy. HHG is often driven in gaseous targets, where this process has been thoroughly explored. In particular, in the last decade there has been a great interest in developing interaction schemes to tailor properties, such as the orbital angular momentum or the polarization, of the emitted harmonics. HHG can also be driven in solid and liquid targets, although these research areas have began to gain importance only very recently. Remarkably, considering crystalline solids as targets opens the door to exploring the signatures in the harmonic spectrum of the crystal symmetries and its interplay with the driving fields symmetries. In this thesis work, we focus on the effects of the crystal symmetries in HHG from graphene. We explore two different interaction geometries, characterized by the incidence angle of the driver: grazing incidence and normal incidence. We demonstrate that, in the first scenario, the translation symmetry of the crystal plays a fundamental role, leading to a temporal matter Talbot effect in the electronic wavefunction, which can traced in the harmonic spectrum. We also show that HHG in this scenario is analogous to a Talbot-Lau interferometer in the subnanometer and sub-femtosecond spatial and temporal scales. On the other hand, in the case of normal incidence, we analyze the anisotropic response arising from the rotational symmetry of graphene and how it is affected by dephasing. We also explore the up-conversion of structured beams through high harmonic generation from graphene. In particular, we demonstrate that, in the case of linearly polarized vector beam drivers, the rotational symmetry of the crystal plays a fundamental role in the spatial structure of the harmonic field. Therefore, we propose topological spectroscopy, driven by linearly-polarized vector beams, as a tool to retrieve the nonlinear response of any anisotropic solid based on the topological structure of the harmonic far field. Finally, to illustrate the sensitivity of the topological features of the harmonic far field to changes in the crystal symmetry, we investigate HHG driven by linearly-polarized vector beams in strained graphene.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Luis Plaja Rustein — Grupo ALF, Universidad de Salamanca

Codirector: Carlos Hernández García — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

Study of Multielectron Dynamics and Structured Laser Beams in Attosecond Physics

AUTORA / AUTHOR: Alba de las Heras Muñoz — Universidad de Salamanca

This thesis work exploits the potential of ultrashort laser pulses to explore electron dynamics in matter and generate extreme ultraviolet (EUV) or soft X-ray emission in the form of attosecond pulses with customized properties. The strong-field ionization of atoms driven by high-intensity femtosecond laser pulses is the starting point for two physical phenomena covered in this thesis manuscript: the controlled generation of ring currents and high harmonic generation (HHG). A novel method, termed current-gating, is introduced to synthesize attosecond magnetic field waveforms by temporally confining ring currents induced by circularly polarized laser fields, representing a significant advancement in ultrafast magnetism. The rest of the thesis work focuses on HHG as a nonlinear optical process that offers great possibilities to track electron dynamics (including resonances or electron-electron correlation) and to map the tunable properties of low-frequency pulses into the EUV or soft X-rays. A second plateau extending to higher photon energies than the usual HHG is found as a spectral signature of correlated back-reaction during the laser interaction with He atoms. A multi-peak harmonic signature is identified as the trace of extremely fast attosecond Rabi oscillations driven by EUV femtosecond pulses in He atoms. In collaboration with experimental groups, the investigation of diverse HHG schemes driven by structured laser beams in macroscopic gas targets leads to high harmonic beams and attosecond spatiotemporal emission with unique properties of spin and orbital angular momentum. These configurations include the generation of scalar and vectorial high-harmonic vortex beams with high topological charge, circularly polarized high-harmonic vortex beams with steady/time-varying orbital angular momentum (i.e. self-torque), and attosecond vortex pulse trains. These spatiotemporal light structures in the EUV or soft X-ray extend the prospects of attosecond science and related quantum technologies for improved imaging and spectroscopic capabilities, paving the way for triggering and probing ultrafast angular momentum light-matter interactions.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Luis Plaja Rustein — Grupo ALF, Universidad de Salamanca

Codirector: Carlos Hernández García — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

Micromagnetic Modeling of Magnetization Processes and Magnetoelastic Interactions

AUTOR / AUTHOR: Mouad Fattouhi — Universidad de Salamanca

El control eficiente de las propiedades estáticas y dinámicas de las texturas magnéticas a nanoescala es uno de los elementos clave hacia una espintrónica energéticamente eficiente. El control de texturas magnéticas, como paredes de dominio y skyrmions, se puede lograr utilizando varios métodos, incluido el campo magnético, la corriente polarizada por espín y los pulsos láser. Estos enfoques abrieron nuevas vías para explorar aplicaciones basadas en la espintrónica, como memorias de carreras, puertas lógicas, sinapsis de neuronas artificiales y sensores. Sin embargo, la creciente necesidad de minimizar el consumo energético de los dispositivos computacionales y de almacenamiento de datos impone la búsqueda de nuevas alternativas para controlar los sistemas magnéticos. Una de las alternativas prometedoras que ha surgido en los últimos años es el uso de campos eléctricos. Se ha demostrado que en multiferroicos artificiales, la tensión inducida por campos eléctricos se puede utilizar para lograr un control eficiente de los sistemas magnéticos mediante un acoplamiento magnetoelástico. Este método mostró un gran potencial debido a sus bajas tasas de disipación de energía. A pesar de estos logros, los efectos de la tensión en los sistemas magnéticos siguen siendo un tema de investigación fundamental. El objetivo de esta tesis es explorar nuevas formas de utilizar la deformación para controlar la estática y dinámica de la magnetización en sistemas ferromagnéticos mediante simulaciones micromagnéticas y modelos analíticos. Primero, utilizando simulaciones electromecánicas y micromagnéticas, proponemos un nuevo método para controlar el movimiento del skyrmion impulsado por la corriente. Mostramos que en un dispositivo piezoeléctrico/magnético, se puede crear un gradiente de deformación transversal debido al perfil de campo eléctrico no uniforme en la capa piezoeléctrica. Tal gradiente de tensión se transferirá al sistema magnético, induciendo una fuerza sobre los skyrmions que puede usarse para controlar su dinámica. En particular, demostramos que dicha fuerza sintoniza el efecto Skyrmion Hall tanto en películas ideales como desordenadas. En la segunda parte, nos centramos en explorar los efectos de la tensión uniforme y dependiente del espacio en las paredes del dominio magnético (DW) en tiras ferromagnéticas magnetizadas perpendicularmente. Mostramos que las deformaciones uniformes en el plano permiten un cambio eficiente del estado DW entre las configuraciones de Neel y Bloch. Luego, demostramos que los gradientes de deformación tanto dentro como fuera del plano pueden impulsar el movimiento DW en ausencia de campos magnéticos y corriente polarizada por espín. Por un lado, encontramos que el efecto de un gradiente de deformación fuera del plano sobre un DW es equivalente al de un campo externo. Por otro lado, los gradientes de deformación en el plano inducen una dinámica particular en la que el DW no presenta ruptura de Walker. Demostramos que esta dinámica depende de la dependencia del ángulo interno DW de la deformación local, lo que da como resultado un nuevo par de amortiguación que previene la aparición de un movimiento turbulento DW. En la última parte de esta tesis, ponemos énfasis en los Neel DW impulsados por torque de órbita de giro (SOT) estabilizados mediante una tensión uniforme en el plano. Mostramos que en franjas estrechas, dichos DW se mueven con una velocidad que depende linealmente de la corriente aplicada hasta un valor umbral, donde su velocidad comienza a disminuir gradualmente y posteriormente desaparece. Atribuimos este comportamiento al SOT precesional que cambia la configuración interna del DW de Neel a Bloch, lo que eventualmente anula los pares que contribuyen al sistema. En franjas anchas, volvemos a encontrar que el DW deja de moverse más allá de un cierto umbral de corriente; sin embargo, su estructura interna exhibe un patrón no uniforme con dinámicas transitorias complejas. Exploramos esta dinámica transitoria utilizando simulaciones micromagnéticas, así como un modelo unidimensional (1D) extendido que tiene en cuenta las variaciones temporales y espaciales de las coordenadas DW. Utilizando este modelo extendido, demostramos que la estructura interna de DW es una estructura ondulada regular con torceduras de 180 grados, y el ancho de la torcedura depende de la interacción de intercambio y la anisotropía magnetoelástica. Además, observamos distorsiones en la forma DW, que atribuimos a la competencia entre SOT y el par de intercambio.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Luis López Díaz — Grupo SINAMAG, Universidad de Salamanca

Codirector: Eduardo Martínez Vecino — Grupo SINAMAG, Universidad de Salamanca

Portada de la tesis doctoral

Magneto-Thermal Effects Induced by Electric Currents in Ferromagnetic Nanostrips

AUTOR / AUTHOR: Rodrigo Guedas García — Universidad Politécnica de Madrid

Spintronics is a field of physics that has been booming since the discovery of Giant Magnetoresistance (GMR), a finding awarded with the Nobel Prize in 2007. Modern Spintronics is in constant search for applications of nanomagnetism such as future non-volatile memories, logic gates even functional devices for neuromorphic computing. At the core of all these applications is the transfer of angular momentum from the electric current to the local magnetization. This thesis studies three key aspects in modern spintronics: Joule heating, magnetic domain wall motion, and Skyrmions. Our study on Joule heating focuses on analysing the relevant parameters that control the heating process on a ferromagnetic nanostrip when an electric current flows through it. To do this, simulations were performed using COMSOL Multiphysics software, studying in detail the influence of parameters such as interface thermal resistance, the thermal conductivity of the substrate and the strip, and the influence of the strip dimensions. As a result, we proposed a simple model to estimate the temperature of a nanostrip, using only parameters that are easily accessible to experimentalists. When the electric current density is very large, typically larger than 1011 Am-2, the nanodevices can get damaged due to different mechanisms such as electro-migration or simply by evaporation. Most of the spintronic experiments operate with a current density typically larger than 1011 Am-2, so it is always important to generate mechanisms to improve heat dissipations. In this thesis, we propose a method to dissipate thermal energy and reduce the temperature of the strips. It involves coating the strips with materials with good thermal conductivity, so the top surface of the nanostrip can act also as a conductive channel. The top layers provide also structural protection to the devices. We have analysed this fabrication route both theoretically through simulations and experimentally, demonstrating that the proposed fabrication route is very effective enhancing the heat dissipation. Once the heating process and the build-up of heat gradients is properly characterized, the goal was to study the magnetization process in a strip made out of a magnetic material with perpendicular magnetic anisotropy (PMA), in the presence of thermal gradients. After different attempts, we centred the study on the motion of magnetic domain walls on Pt/Co/Pt ferromagnetic strips. These samples showed a very defined large PMA and we studied how the propagation field is altered by a DC electric current, combining the influence of heat and Spin Orbit torques, such as Rashba and/or spin-Hall. Finally, this thesis includes the results of the research conducted during an internship in Spintec, France. Following some theoretical predictions related to the possible existence of planar Skyrmions in samples with in-plane magnetic anisotropy, we conducted an experimental work dedicated to find them. The measurements were performed using both Magnetic Force Microscope and Photoemission Electron Microscope via the Magnetic Circular Dichroism X-ray technique to test the existence of planar Skyrmions. We also conducted MuMax3 simulations to contrast the experimental results.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Víctor Raposo Funcia — Grupo SINAMAG, Universidad de Salamanca

Director: José Luis Prieto Martín — Universidad Politécnica de Madrid

Portada de la tesis doctoral

Formation and Characterization of Surface Micro- and Nanostructures in Polymers and Polymer Nanocomposites Prepared by Irradiation with Pulsed Nano- and Femtosecond Lasers

AUTOR / AUTHOR: Javier Prada Rodrigo — Universidad de Salamanca

En este trabajo de tesis doctoral se estudió la formación de estructuras superficiales periódicas inducidas por láser (LIPSS, siglas del inglés Laser Induced Periodic Surface Structures) en polímeros y compuestos de matriz polimérica en forma de películas delgadas, ya sean autosoportadas o soportadas en diferentes substratos como son silicio, vidrio, acero, oro y poli(etileno tereftalato) (PET). Los polímeros y compuestos estudiados son PET, poli(trimetileno tereftalato) (PTT), un nanocomposite compuesto por PTT y nanotubos de disulfuro de wolframio (WS2) (PTT-WS2) y poli(3-hexiltiofeno) (P3HT). En el caso de películas delgadas de PET depositadas sobre distintos substratos, las irradiamos con pulsos laser Gaussianos de femtosegundo en el infrarrojo (795 nm, 64 fs, 5 kHz) para estudiar la influencia del espesor de la película de polímero, y el material y la rugosidad del substrato en la formación de LIPSS. Demostramos que el espesor condiciona la formación de LIPSS, de hecho, éstas no se formaron para películas con espesores mayores de 1300 nm. Además, la irradiación produjo LIPSS perpendiculares a la polarización del láser en muestras depositadas sobre substratos de oro de baja rugosidad, y LIPSS paralelas a la polarización en muestras sobre substratos de silicio o vidrio. Sin embargo, no aparecieron LIPSS en las muestras sobre substratos de PET, ni sobre oro de rugosidad alta, ni tampoco sobre de acero de rugosidad alta. El periodo, que en general es cercano a la longitud de onda del láser, y profundidad de las estructuras, medidos con microscopía de fuerzas atómicas (AFM), adquieren valores que están condicionados por el material del substrato y el espesor de la película delgada. A partir de estos resultados, propusimos un mecanismo de formación adicional a los ya conocidos, que se activa debido a la excitación de una onda electromagnética superficial generada por dispersión (SSW) en la interfaz película delgada-substrato. El caso de las LIPSS formadas en polímeros sobre substratos de oro, las cuales aparecen orientadas en la dirección perpendicular a la esperada, decidimos estudiarlo más a fondo con la ayuda de simulaciones numéricas del campo eléctrico. La concordancia entre las simulaciones y las medidas experimentales nos llevó a postular que la SSW que activa el mecanismo de formación de LIPSS en este caso es un plasmón polaritón superficial (SPP). Además del trabajo que acabamos de describir, también estudiamos el efecto de las LIPSS en la modificación de distintas propiedades de nuestras muestras. En el caso de las películas autosoportadas de PTT y PTT-WS2, las irradiamos con haces Gaussianos de femtosegundo en el ultravioleta (265 nm, 260 fs, 1 kHz), resultando en la formación de LIPSS paralelas a la polarización con un periodo similar a la longitud de onda del láser. En las muestras con nanoaditivo la energía necesaria para la aparición de LIPSS fue ligeramente mayor, efecto que achacamos a su mayor porcentaje de cristalinidad y mayor disipación térmica. En cuanto al efecto de las LIPSS en las propiedades micromecánicas de las muestras, fue determinado con la técnica de mapeo nanomecánico cuantitativo de fuerza máxima (PF-QNM) y fue similar para ambos materiales. El módulo de Young se mantuvo constante, pero las fuerzas de adhesión disminuyeron aproximadamente en un factor cuatro tras el nanoestructurado, lo que atribuimos a un cambio en la química superficial. Respecto a la mojabilidad, la caracterizamos utilizando la técnica de la gota sésil para medir el ángulo de contacto del agua, glicerol y aceite de parafina en las dos muestras. En ambas muestras la mojabilidad aumentó con la formación de LIPSS y la energía superficial total permaneció constante. Sin embargo, su componente polar negativa aumentó considerablemente. También achacamos este fenómeno a un cambio en la química superficial. Por otro lado, irradiamos películas delgadas de PET depositadas sobre distintos substratos con haces vectoriales de femtosegundo en el visible (515 nm, 180 fs, 3 kHz). La irradiación con haces vectoriales sobre películas delgadas de PET provocó la formación de LIPSS paralelas a la polarización en las muestras depositadas sobre substratos de silicio o de vidrio, consiguiendo estructuras en forma de radios de bicicleta, anillos concéntricos y en espiral. En cuanto a las muestras depositadas sobre substratos de oro, aparecieron estructuras perpendiculares a la polarización del láser, pero demasiado desordenadas para poder llamarlas LIPSS. También utilizamos estos haces para irradiar P3HT, consiguiendo LIPSS con las mismas direcciones paralelas a la polarización del láser. Además, utilizamos haces vectoriales y de vórtice óptico de nanosegundo en el visible (532 nm, 5 ns, 20 Hz), induciendo la formación de LIPSS en el mismo rango que se reportó previamente para haces Gaussianos con la misma longitud de onda. Esto permitió la generación de estructuras circulares, radiales y espirales. Medimos el cambio en la conductividad encontrando una disminución muy acusada en la parte superior de las estructuras en comparación con lo que ocurre en la parte inferior. Este cambio fue causado por una pérdida de cristalinidad. También caracterizamos el cambio en la mojabilidad utilizando el método de la gota sésil para medir el ángulo de contacto del agua antes y después de la irradiación. No encontramos diferencias para las diferentes polarizaciones del haz. Para todas ellas, la muestra se volvió más hidrófila después de la irradiación. Explicamos este fenómeno teniendo en cuenta los cambios químicos causados por la oxidación inducida por la irradiación láser. Finalmente, irradiamos películas delgadas de (6,6)fenil-C71-ácido butírico metil ester (PC71BM) con esos mismos haces de nanosegundo produciendo LIPSS paralelas a la polarización del láser de un período menor que las encontradas en P3HT y en un rango de fluencia mucho más estrecho. Sus periodos y profundidades evolucionaron con los parámetros de irradiación igual que las estructuras encontradas en P3HT.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Pablo Moreno Pedraz — Grupo ALF, Universidad de Salamanca

Codirectora: Esther Rebollar González

Portada de la tesis doctoral

Development of Ultra-Stable Characterization Techniques for Ultrashort Laser Beams

AUTOR / AUTHOR: Miguel López Ripa — Universidad de Salamanca

La drástica evolución que ha experimentado la ciencia láser en las últimas seis décadas, y en particular en el campo de los pulsos ultracortos, ha ido acompañada de grandes avances en el desarrollo de técnicas para su caracterización. A pesar de la gran cantidad de métodos de caracterización desarrollados en las últimas dos décadas, aún es necesario implementar sistemas más simples y robustos que también puedan operar en múltiples rangos espectrales. Esta Tesis está dedicada al estudio y desarrollo de técnicas de caracterización temporal y espaciotemporal con configuraciones compactas y estables, que sean versátiles para, por ejemplo, analizar haces láser ultracortos con diferentes duraciones temporales y en diversas regiones espectrales. La estructura de la Tesis está dividida en cuatro bloques principales. En primer lugar, en la Parte I se presenta una breve introducción a la metrología óptica ultrarrápida y los avances de las técnicas de caracterización espacial, temporal y espaciotemporal a lo largo de los últimos años. Después, la Parte II se enfoca en la revisión y extensión de las capacidades de la técnica de caracterización temporal amplitude swing, demostrando tres avances clave: operación en diferentes regiones espectrales desde visible hasta infrarrojo cercano, con un rango de sintonizabilidad que abarca más de una octava; caracterización de pulsos ultracortos en régimen de pocos ciclos; o estudio de diferentes esquemas de modulación de amplitud. Además, se implementa un nuevo algoritmo de reconstrucción para analizar las trazas del sistema amplitude swing basado en las estrategias Differential Evolution. En tercer lugar, en la Parte III se describen los fundamentos, el rango de operación y la demostración experimental de una técnica de caracterización espaciotemporal basada en la interferometría lateral compacta (bulk lateral shearing interferometry). Además, la técnica se emplea para caracterizar acoplamientos espaciotemporales complejos, como son los vórtices ópticos constantes y variables en el tiempo o las aberraciones introducidas al focalizar haces láser con lentes astigmáticas. Finalmente, en la Parte IV se resumen las principales conclusiones y futuras líneas de trabajo.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Íñigo Sola Larrañaga — Grupo ALF, Universidad de Salamanca

Codirector: Benjamín Alonso Fernández — Grupo ALF, Universidad de Salamanca

Portada de la tesis doctoral

Study of the Macroscopic High-Order Harmonic Emission from Single-Layer Graphene

AUTOR / AUTHOR: Roberto Boyero García — Universidad de Salamanca

En esta tesis se presenta un estudio teórico sobre el proceso de generación de armóni cos de orden elevado en una capa de grafeno desde el punto de vista microscópico hacia el macroscópico. Nuestros resultados parten del estudio del papel de las recolisiones imperfectas, recién descubiertas en sólidos gruesos, pero en el contexto de materiales monocapa sin gap como es el grafeno. Considerando distancias de recolision entre el par electrón-hueco diferentes de cero, explicamos las emisiones observadas en los resultados obtenidos con la ecuación de Schrödinger dependiente del tiempo, para tiempos de recombinación superiores a un ciclo del campo inci- dente. Además, presentamos el primer análisis macroscópico del proceso de HHG en grafeno. Consideramos la influencia de la distribución de intensidad espacial del campo incidente en la emisión total de armónicos. El resultado concluye que existe un determinado anillo en la lámina de grafeno en torno al eje de propagación, cuyas emisiones gobiernan las emisiones totales del proceso. Finalmente, basándonos en estudios previos sobre el comportamiento anisótropo de la lámina de grafeno, hemos desarrollado una técnica para caracterizar grafeno policristalino mediante espectroscopia de armónicos de orden alto.
Leer más...

DIRECCIÓN / SUPERVISION:

Director: Luis Plaja Rustein — Grupo ALF, Universidad de Salamanca

Director: Carlos Hernández García — Grupo ALF, Universidad de Salamanca